441hp 414tq...

[nyc_srt8]

with Interia heads (big valve option), Inertia srt max hell cam, Inertia ported and internal coated intake manifold, Inertia custom cmr tune, Kooks header (PM-FL coated), Airhammer CAI and Corsa cat-back exhaust.

The tuning experience was top notch. I called up Stu and he had his tuning guy send me a tune specific for my setup. Part throttle is great and wide open throttle shifts are firm. So since I was going to the track in 2 days I asked Inertia tuning guy if he could work with me on the dyno the following day to fine tune it and see how much hp we can squeeze out. He said sure. So off to the dyno with Dan (flybyu) for moral support. The 1st pull on the Inertia tune yielded 427hp 396tq. After 3 pulls and emailing him logs with dyno results and he emailing me back a tune the end result was 441hp 414tq. The Inertia tuner wanted a few more pulls because he believed we could squeeze another 20hp out of her. Unfortunately, the dyno shop was closing so I have a 5:30pm appointment on this saturday for part 2 of my tuning.

Before the last pull a guy from American Muscle TV showed up and ask if he could video the last run. Here it goes...
http://videos.streetfire.net/video/3...COM_159024.htm

Stay tuned for part 2...pun intended!

[FlyByU]

STUrific!!!!!!!!!!!!

[nyc_srt8]

Originally Posted by FlyByU

STUrific!!!!!!!!!!!!

You know thats gay right Dan....

[HotRod]

12.3 @113.5 1.901 60ft

Is this before heads/tune/cam? If not what mods were used. When the time comes, this is the area Im shooting for. Thanks for the info.

[nyc_srt8]

Originally Posted by HotRod

12.3 @113.5 1.901 60ft

Is this before heads/tune/cam? If not what mods were used. When the time comes, this is the area Im shooting for. Thanks for the info.

I ran the 12.3 with the same setup but I had a crappy cmr tune. Now with this new tune the car is even faster. I'm going to the track this weekend to try and be the 1st in the 11's on street tires.


I used whatever you see in my sig... www.inertiamotorsports.com or you can call the owner(Stu) directly at (512) 964-7724.

[HotRod]

Thanks for the info. If you dont mind me asking, about how much is invested to get you to this point? Are you expecting .2-.3 out of your new tune?

[nyc_srt8]

heads, cam, tune, intake manifold, headers, cat-back , cai costed me a around $5500